How to Stitch ‘Inside to Outside’ Corners

This is always tricky – but successfully done – shows you really know how to ‘boss the fabric’ around!

The location of what you see is a pointed band under the bust on this apron I was making for my daughter.  Where the top of the point of the band meets the bust portion of the apron, is this ‘Inside to Outside’ Corner.

1.  Stitch right along the stitching line (5/8″ in this case) on the uppermost portion of this ‘corner, pivoting exactly at the corner’.  Clip right to the spot where you pivoted.  See the photograph below.  This reinforces this corner.

Reinforce stitch and clip to stitching

Reinforce stitch and clip to stitching

2.  Opening up this clip, pin the stitching pivot on this piece EXACTLY to the intersection of the two seam lines on the other piece.  Precision is important.  See the photograph.

Pin, matching the pivot points

3.  When stitching the two together, stitch right to the pivot intersection point, stop with the needle down RIGHT ON THE POINT.  Then flip the excess up, out of the way as you see in the photograph, I have done.  Note the fold going upwards, to the left of the presser foot.

 

Pivot right at point, then flip excess up and out to the left.

Pivot right at point, then flip excess up and out to the left.

4.  Press from right side – checking your work  This ‘inside to outside corner’ should look like mine.

Finished 'Inside to outside' corners at top and bottom of the inset band.

Finished ‘Inside to outside’ corners at top and bottom of the inset band.

You may also like...

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.