Christmas ‘Living’™ Creative Sweatshirt Jacket
I was excited about completing my new jacket version of the Living™ Talking Pattern™ last week and uploaded a new Album on my business Facebook Page…but now I want to take a minute to repeat those photos here and share more regarding the creative process that I so love.
If you look closely at the set of 3 buttons from Crone Art Fimo Clay Buttons on this jacket – you can see that THEY WERE THE INSPIRATION. I sell amazingly beautiful buttons of this type only at the Sewing Expos and guild/shop appearances since they are one of a kind and therefore would take forever to scan, measure, describe and put on my site. 🙂 However… you can always contact me with specific color/size/shape needs and ‘m most happy to snap a picture of some that qualify and email it over to you!
I especially loved the touch of purple in them – feeling that capitalizing on that color with the ‘typical’ green and red Christmas color theme would take it beyond solely a ‘Christmas’ look.
Here you can see that even though I had already applied an iridescent hot pink/green silk binding to the jacket’s right front edge – at this point I realized I didn’t like the ‘pink’ that was showing in that fabric, AND I really was considering the emphasis on the purple that I ended up with.
Look closely and you can see that yes – I had even mitered those points of the binding. OFF they came. Creative sewing definitely includes UN-SEWING!!!
That is…if you are like most creative people – and have to ‘try it’ before you can see if you ‘like it’. Kudos to you if you can ‘see’ the result ahead and always KNOW if you’re going to like it or not!
After I had committed to the front closing edge shape, decided on how much of the left front’s Underlap to let be exposed, and created interfaced facings for both the left and the right front edges, it was time to play wit the hem silhouette. Here you can see what I came up with. This is why details like exact hem length and shape are NOT included in my Talking Patterns, but rather my personal explanation and teaching you HOW to determine this for YOUR project IS included. Much, much more fun – and even educational in the long run!
Look closely here at the inside of the jacket’s left front. Because I wanted the green silk dupioni to ‘peek’ substantially to the right of the right front edge on the jacket, I set it over further than the cut edge on the jacket’s left front. THAT is why the stitching line is further to the left edge. I eventually trimmed back the excess green sweatshirt edge closer to the stitching. ‘
The black you see here is Pro Woven Fusible Interfacing from Pam Erny that I love.
If you look very closely, you can see that I’ve serged the right most edge of this interfaced silk Underlap.
And here is the photo that shows closely how much underlap on the Jacket’s left front I had decided to have exposed. Note the pins marking the points of the closure. I needed to decide and mark that securely so that the ‘fit’ didn’t constantly change on me.
This decided, THEN I could go back and tweek the side seam fit. I DID use Fronts, Back and Sleeve patterns as found in my Book 2, or Genesis Too™ Talking Pattern™ or Refined Too™ Talking Pattern™ to create the basic part of this jacket, as I wanted the sleeve up at it’s natural location on my shoulder. You can do the same – even if you do NOT have my bodice pattern. Just make use of ANY jacket pattern that fits you the way you want it to. Cut the back, and the sleeves out of the available sweatshirt – which I ‘see’ as just fabric once the ribbings are cut off. For the Fronts, obviously leave it cut on the center font fold, and cut neck, shoulder, armscyes, and side seams ONLY. THEN you your buttons down – and go to work designing a pleasing edge line for the front closure that looks good with YOUR buttons.
With my stash of fabrics and yarns for this jacket was this silky polyester that had a wonderful selvage. I thought all along that I would use this fabric as well – and here at the right most side of this photo, you can see where I had wrapped a cable cord with the selvage. However – durned if the red wasn’t objectionably too ‘orangey’ compared to the blue undertone of the chenille yarn I’d already chosen and attached – centered with a purple chenille yarn.
Below, see the entire hem silhouette I decided on. The point in the back is centered, but I had also decided that I would do some couching in a non-centered orientation as well…just not sure WHAT. You have to be OK with NOT making ALL decisions at one time – but rather, one decision at a time that you are feeling good about and just trust that the rest will fall into place. Just like life – eh? See how valuable SEWING is?!?
Anyway…here you see that I’ve trimmed the sides of the layered and stitched (down the center of) 3/4” wide bias strips so that the edges are clean and straight 1/4” from each side of the center stitching.
AND, I even saved the scraps that you see in the pile. They were so pretty – I think they’ll end up on the front of some stitched Christmas greeting cards. Stay Tuned………..
After trimming, I ATTACK both edges, both sides of this strip with the Fabric Chenille Brush which is indispensable for this task! NOTHING works as well! Find it HERE. Just $5.99, but for a limited time – get it FREE with purchase of my DVD: Refined Embellishments for Creative Sewing – just $19.95.
The sleeve weren’t as long as I would like – since I had cut them out of the sweatshirt in order to Re-Cut with a sleeve cap. Just a ‘creative opportunity’… I added interfaced BIAS cuffs as you can see here. And yes – interfaced the outermost layer with Pro Woven Fusible Interfacing.
And here you can see my finished jacket from the back side. Be assured the placement of all of the chenille strips and couched yarn was NOT quickly and immediately decided upon! Not only standing back from a proposed design of those embellishments, but TAKING A PICTURE with my digital camera to view has become my absolute favorite way of ‘seeing’ if I really like a design proposal or not! I’m surprised not to see that trick yet on Project Runway.
There you have it – the Creative Process for this jacket – and such fun! Approximately 6 Jumbo Clear Plastic Snaps actually close the front of the jacket. Those were unavailable for a time, but now I have them back again at my site HERE. YEA! Those snaps are included with the Living Pattern Combo which includes the pattern, snaps, my tissue pattern for the front, back and sleeves AND makes a $5 donation to my Drill a Well for an African Village project!
Don’t let time get away from you – send in your entry for my Creative Sweatshirt Jacket contest. Find all the details HERE – and have a good chance at winning the Grand Prize of $250 at my site or one of the other great prizes. Deadline for entry: November 15, 2011.